We have the base rail kit you referenced with our part number # TH21785. This is the base rails for a TracRac SR ladder rack for short bed Ford trucks. view full answer...
The TruXedo LoPro cover that fits your 1999 Ford F-350 Super Duty with 8' bed is the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX559601.
The correct replacement tarp for that cover is the Replacement Cover for TruXedo Lo Pro Soft Tonneau Cover # TX559601-CVR. view full answer...
The Lippert 122460 you referenced is a standard 10 x 2-1/4 inch brake hub for a 3500 axle. It has a 5 lug on 4-1/2 inc bolt circle and is compatible with a L44649 outer and L68149 inner wheel bearing and a 1.719 ID grease seal. We offer compatible hubs as part # AKHD-545-35-EZ-K.
We don't offer Lippert brake assemblies, but the etrailer brand brake assemblies you'd looked at, part # AKEBRK-35 include the left and right brake assemblies that would definitely be compatible with your existing... view full answer...
Looks like you have an older Yakima SwingDaddy so the correct replacement spring pin would be the part # 8890314.
If instead you are looking for a replacement hitch pin that secures it to the trailer hitch you would want the part # 889-0231 view full answer...
It sounds like you're looking for the Replacement Air Spring for Trailair 5th Wheel Pin Boxes part # LC432404 and Replacement Pin Box Tank Valve for Lippert or UltraFab TrailAir Pin Boxes part # LC156740. I have attached for you below videos I made replacing each of these parts. view full answer...
We do have the Replacement Mounting Hardware Kit # 31-564PK which fits the Westin E-Series Bull Bar # 31-5640 for your 2006 Ford F-350 Super Duty. Since you mentioned the bull bar came off a Dodge the hardware kit will not just allow you to bolt on any bull bar. The bull bars are custom made for different vehicles and while they often look similar they are not always going to be universal. If you can determine exactly what truck the bull bar came off I can look and see if it will be compatible... view full answer...
The front left and front right jack are the same on the Lippert Ground Control 3.0 Leveling System, if you need a replacement we have the Replacement Front Jack for Lippert Ground Control 3.0 Leveling System part # LC362485. view full answer...
We have exactly what you need! The Hopkins part # HM40975 is a direct replacement for the OEM 4-Way/7-Way connector on your 2019 Ford F-350 and is cost-effective so you don't have to sell any limbs.
Attached is a review video for you to check out. view full answer...
I'm not totally sure what your first question is but I believe you are asking what the maximum drop of this system is. The max drop figure for the Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers # 325-GH-1425 is 15 inches. This is not designed to be used with weight distribution though as it does not have a way to attach a head, but we do have the WD style shanks from them like the part # 325-GH-1102 for a 2-1/2 inch hitch or # 325-GH-1202 for a 2 inch hitch that you could use with standard... view full answer...
It sounds like you are needing the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug # 40167 for your 2003 Ford F-350. This is an aftermarket replacement for the factory connector and harness on your F-350.
Be sure to use Dielectric Grease # 11755 on the connectors to reduce shorts and damage from corrosion on the connections. view full answer...
For your 2015 Ford F-350 that came with the factory gooseneck hitch you can use replacement ball # RP19311 or # C60601. Either ball will fit. view full answer...
You are on the right track. The Reese M5 fifth wheel hitch part # RP30922 will fit the factory fifth wheel prep package you have installed in the bed of your 2016 Ford F-350. This hitch also is designed to allow you to know for sure that it is solidly connected to your trailer with its handle/jaw design.
To open the jaw you pull out and back on the handle. When the king pin has fully seated into the hitch the handle will slide back in clamping around the kin pin. There is what's called... view full answer...
The 3/4" sleeve that comes with the Draw-Tite Pin and Clip for 3" Trailer Hitch Receivers # 63258 only comes in this kit so you'd have to purchase the whole kit for that sleeve. view full answer...
We do carry the Replacement Wear Plates # C52WR for the Curt PowerRide 5th Wheel Trailer Hitch # C48BR that fits your 2022 Ford F-350 long bed with the factory prep/puck system. Unfortunately, there is no estimated life span for these as there are to many factors such as trailer weight, pin box surface size, and any other dirt that can affect the life of the plates.
Having the wear plates installed on the receiver does have its benefits over a traditional Lube Plate # RP83002. First you... view full answer...
Yes, the Reese fifth wheel bracket kit part # RP50074 is a fit for your 2017 Ford F-350. If you wanted to order this kit with the rails too you would need the part # RP50074-58 instead. view full answer...
For your 2017 Ford F-350 we have the B and W Companion setup that is widely considered to be the nicest fifth wheel hitch around. For that you would want the part # BWRVK3500 for if you have a long bed or part # BWRVK3400 for if you have a short bed.
Then for a rail kit you'd need the part # BWGNRK1116 which is a confirmed fit for your truck. The great thing about this rail kit is that it also doubles as a gooseneck hitch if you were to ever need to tow a gooseneck trailer. view full answer...
The correct replacement key for your etrailer Hitch Receiver Lock # e98881 with key code 029 would be Replacement Key for etrailer Hitch and Coupler Locks # e75UR. view full answer...
Your 2020 Ford F-350 Super Duty should have a fully-functioning 7-Way (there should be 6 pins and 1 center plug) with the 12V power active. If this isn't active then you might need to check your fuses.
From my understanding Lance likes to make their wiring difficult for whatever reason so I recommend cutting off your Lance trailer connector and replacing it with the Hopkins # H20046 which will match right up to your F-350 7-Way. Please note you'll want to make your wiring connections per... view full answer...
It sounds like you have the OEM 5th wheel prep package in your 2015 Ford F-350. The puck covers or plugs will have to be obtained from a dealer. The Aftermarket version of the underbed system is a little different than the factory one and they do not make those round covers available.
The round cover for the center gooseneck hole # RP30136 might be a fit for the center hole. The inside diameter is 2-3/8 inches and the outer diameter is 3-1/2 inches. view full answer...
The O-ring on the bearing shaft you speak of is not a replacement part Curt offers, but you can easily find one at a hardware store. You'll need a 31.5 mm O-ring. view full answer...